The manual monorail trolley is driven by a heavy object that is lifted by hand. It travels on the lower edge of the I-beam track and hangs a chain hoist or other lifting machinery below the trolley, forming a manual lifting and transportation trolley. It is installed on monorail overhead transportation lines in straight or curved roads, or on manual single beam, bridge, or cantilever cranes. It is widely used for installing machines and lifting goods in factories, mines, docks, docks, warehouses, and machine rooms, Especially suitable for equipment maintenance work in areas without power supply.
Precautions:
1. It is strictly prohibited to use a small vehicle beyond its rated load capacity.
2. When lifting heavy objects, it is strictly prohibited for any person to walk or work under them.
3. Bearings and rail surfaces should be lubricated regularly, and all fasteners should be checked for looseness.
Usage specifications:
1. It is strictly prohibited to overload the monorail trolley.
2. When lifting heavy objects with a monorail trolley, it is strictly prohibited for any person to walk or work under the heavy objects.
When lifting heavy objects with a monorail trolley, the weight should be within the plane of the I-beam web, otherwise do not lift. When operating a monorail trolley, the hand zipper strip should be subjected to force within the central plane of the hand chain wheel and should not be pulled diagonally.
4. If there is an abnormal hand pull on a monorail trolley, it should not be pulled forcefully and should be immediately stopped from use to check the cause.
5. The gear and rail surface of the monorail trolley should be regularly lubricated, and all fasteners should be checked for looseness.
6. The monorail trolley manual monorail crane is supported by I-beams for operation, so I-beams that are deformed, twisted, cracked, or do not meet standards or have other defects cannot be used as monorail cranes.
