How to solve the problem of electric hoists not working in shopping malls

Jul 13, 2023

Leave a message

The electric hoist in shopping malls, also known as small electric hoists or civilian electric hoists, is the commonly used micro electric hoist. The pedestrian flow in shopping malls is large and dense, and no major accidents are allowed. However, due to the lack of expertise or operational errors of the operators, some small problems may still be encountered frequently. We only need to find the problem immediately and handle it in a timely manner.

The reason for this phenomenon should be considered early on whether there is a stable current supply. The electric hoist can only operate normally after the current and voltage are supplied normally, so first check if the power supply is powered on. Assuming that the engine still cannot start when powered on, check if the voltage is too low. When the voltage is too low and reaches below 90% of the additional voltage, the normal operation of the motor will be affected, and the operation of the hoist will be affected.

Assuming that the supply and voltage of the electric hoist in the shopping mall are normal and still cannot be started, then consider the formation of electrical damage, circuit disconnection, or poor contact in the main and control circuits of the electric hoist. Require protection personnel to immediately repair the main and control circuits. The electric hoists used in general shopping malls are treated with a cover, which has a higher aesthetic value and is seamlessly integrated with the shopping environment.

Send Inquiry