Mechanical Steel Jack

Chongqing Kinglong Machinery Co., Ltd. is one of the most reliable manufacturers and suppliers of mechanical steel jack in China, also supports customized service. Welcome to wholesale bulk discount mechanical steel jack made in China here from our factory.

Features of Mechanical Steel Jack:

1. Every Mechanical steel jack is proof load tested 1.25 times and inspected before delivery from the factory

2. Very stable thanks to the large ground plate

3. Equipped with double brake pawls

4. All steel housing that protects the mechanical parts inside

5. Mechanical parts made from quenched and tempered alloy steel

6. The crank handle is foldable and equipped with ergonomic handle grip

7. Strong powder coated painting process

8. Conforms to Machinery Directive 2006/42/EC

DATA SHEET

USE GUIDE

Position: Place the rack and pinion jack on a stable and level surface based on centre of gravity of loads, thus jack will not overset when working.

Connection: all flat surface of bottom base or side pawl must connect with loads to keep the best lifting and lowering power, and prevent from loads slipping from jack.

Hard supporting: loads and supporting ground on the vertical side of jack should be hard, adding sturdy pad under the base or above the channel.

Testing before using: before use please test lifting and lowing without load, don't use if get stuck or other problem.

Keep rotating mechanical steel jack handle or lever in the same direction to continue lifting the load. The rack and pinion mechanism will gradually raise the load.